The Arvo Sensor Can User Manual

- Whats in the Box

  • Arvo unit
  • Pre-installed Pod (factory-fitted, ready to use)
  • 3 additional Arvo Pods (Bags) (4 Total) - 10 if individual set of pods was purchased (sol Seperately)
  • USB-C charging cable

The Arvo arrives partially charged. Charge once unboxed.

- Specifications

Specifications

  • Dimensions: 11.4" × 9.8" × 16.1"
  • Capacity: 17 liters
  • Battery: Built-in, USB-C rechargeable
  • Charge duration: Months of normal household use per full charge
  • Compatible liners: Arvo Pods only

- Maintenance

Cleaning
• Use a microfiber cloth or wipe for the interior and exterior.
• Mild spray cleaner or disinfectant wipes are safe.
• Do not submerge the Arvo.
• Avoid spraying cleaner directly into the Sensor Bar or Sealing Module.

- Initial Setup

  • Remove exterior packaging and labels.
  • Turn on by pressing in on the circular power button on rear side. Arvo will beep when powered on.
  • Arvo arrives with partial charge, however it is HIGHLY recommended to charge upon arrival - USB-C charging port on rear side.

That's It. Your Arvo is now set to integrate into your environment.

Operating Your Arvo. View Before First Use

In depth guidance and disclaimers provided below. Please view for a clear understanding of The Arvo, its accessories, and use cases.

Battery and Charging

Battery & Charging

Charge using any standard USB-C cable, no proprietary charger required. Full charge last 3.5 months.

No sleep mode or power-saving settings needed. The Arvo manages battery consumption automatically

LED Indicators — Lightning Bolt Symbol

Flashing red + soft beep during use - battery low, charge soon. Battery at 10 percent

Soft pulsing red when plugged in -charging in progress

Solid green - fully charged

Motion Sensor and Lid

Located in the center of the sensor bar.
The lid opens automatically when movement is detected within 14.5 inches directly above the Sensor Bar on the front of the unit.

The lid stays open for 8 seconds then closes on its own. If your hand or an object is still above the sensor when the 8 seconds is up, the Arvo will beep rapidly until the sensor is clear or The Arvo is placed in open mode via the touch sensor.

Note: The lid will still close even with obstacle protruding from the canister and is not harmful or damaging to the mechanism.

Touch Controls

One Tap — Open Mode

Tap once to open indefinitely or keep the lid open indefinitely once already opened via the motion sensor. Tap once again to exit, and the lid will close.

Two Taps — Aeration Mode

Double-tap to aerate the canister. The lid closes and air is pushed out from the base, pulling the liner down so it sits flat against the walls and base. Best used when installing a new pod or resetting displaced liner.

NOTE: The Arvo will not aerate if the ventilation module on the base is blocked. Avoid placing on tall fiber or shag rugs.

Press and Hold — Auto-Change Mode

Press and hold the touch sensor to begin the automated bag-change sequence. The Arvo seals the current liner (main hatch will open to seal volumes over maximum capacity), cuts it, opens for removal of sealed bag, closes with a light push or via the touch sensor, and prepares the next one, entirely on its own.

Pods & Pod Replacement

The Arvo uses Arvo Pods - compact liner (bag) cartridges containing a continuous roll of liners. Your Arvo arrives with a Pod pre-installed from the factory, ready to use straight out of the box.

Pods are square and fit in any orientation in which the grooves are facing upwards.

When to replace: 

The liner will simply run out mid-cycle when the Pod is empty. The Auto-Change sequence will complete as normal.

How to replace:

  1. Tap touch sensor once to enter open mode
  2. Lift the square lock-ring
  3. Remove the used Pod
  4. Drop in the new Pod
  5. Press the lock-ring down until flush
  6. Double-tap the touch sensor to aerate and seat the new liner

That's it - the Arvo is ready for the next cycle.

Note: Only use Arvo Pods. Generic bags are not compatible with the automated sealing and cutting system and will disrupt the Auto-Change process.

Support and Warranty

  • Manufacturer's Warranty

    Every Arvo comes with a Two Year Extended Warranty from the date of delivery. This covers any functional defects or failures that occur under normal use conditions.

    • Functional defects and mechanical failures
    • One accidental damage incident per coverage period (subject to approval)

    The following are not covered under any warranty:

    • Damage caused by misuse or negligence
    • Cosmetic damage that does not affect function (scratches, scuffs, discoloration)
    • Damage resulting from failure to follow operating instructions
    • Tampering with internal components including the Pod mechanism or Sealing Module
    • Water damage from submersion

    How to make a claim:

    If your Arvo is not functioning as expected and you believe it falls within your warranty coverage, reach out to our support team with your order number and a brief description of the issue. We will assess and respond promptly.

    Contact & Support

    Email:  Support@vitiry.com
    Click to Contact Support
    Note:

    When reaching out, please have your order number ready. This allows us to locate your purchase, verify your warranty status, and resolve your issue as quickly as possible.

    Warnings and Disclaimers

    • Heat Sealer 

      The heat-sealing strip reaches extremely high temperatures during the Auto-Change sequence. Do not insert hands or objects into the Sealing Hatch at any point during operation. If the hatch is open during sealing you may see the strip illuminate — do not touch it. Wait until the full sequence is complete before handling anything inside the unit.

      Children 

      Keep children away from the Arvo during the Auto-Change sequence. The heat sealer activates automatically and without warning once the sequence begins.

      Pods 

      Do not open, unroll, or tamper with the Pod. Each Pod is factory-packed under tension. Tampering will disrupt the liner alignment and can permanently affect the pods usability and/or the Auto-Change process.

      Water & Submersion 

      Do not submerge the Arvo in water. Do not spray cleaning products directly into the Sensor Bar or Sealing Module at risk of damaging .components. Use a microfiber cloth or wipe preferably for cleaning.

      Odor After Sealing 

      A slight rubber smell immediately after the heat sealer activates is normal. It is not a sign of damage or malfunction and will dissipate moments after completion.

      Placement 

      The Arvo works best on traditional flooring (hardwood , tile, carpet, etc.) tall fiber or shag rugs may interfere with the aeration function if the fiber prevent hair from escaping through the base. The ventilation module on the base requires slight clearance in order to function. Blocking it will prevent aeration from working correctly.

      Trouble Shooting

      • Arvo not responding or behaving unexpectedly 

        Power the unit off using the rear button — the button will extend out slightly when off. Wait 3 seconds then power back on — the button pushes in and you will hear a single beep confirming it is on. This resolves the majority of sensor and software issues.

        Unit will not power on 

        The battery is likely depleted. Connect the USB-C cable and charge for at least 30 minutes before attempting to power on again. If the unit still does not respond after charging, contact support.

        Lid opens and closes repeatedly while charging 

        This indicates an unstable power source. Unplug and try a different wall outlet or power strip.

        Auto-Change halts mid-cycle

        1. Clear all obstructions from cinching arms
        2. Tap the touch sensor once to clear any pending mode
        3. Restart the unit
        4. Run the Auto-Change sequence again

        Bag not sealing cleanly

        1. Ensure nothing is sitting inside or obstructing the Sealing Hatch area
        2. Restart the unit
        3. Run Auto-Change again

        Minor liner misalignments are corrected automatically — a clean restart resolves most sealing issues.

        Bag stuck or won't drop into the canister

        Double-tap the touch sensor to run Aeration Mode. This releases liner tension and allows the bag to drop correctly.

        Pod won't sit flush 

        Ensure the lock-ring is pressed firmly all the way down. The Pod should drop in naturally with no resistance — if it feels forced, lift it out, reposition, and try again.

        Lid not triggering from motion 

        Ensure your hand is within 14.5 inches directly above the Sensor Bar. Side movement will not trigger the sensor. If the sensor still does not respond, restart the unit.

        Aeration not working 

        Check that the ventilation module on the base of the unit is not blocked. The Arvo will not aerate on tall fiber or shag rugs. Move to a hard floor or low pile surface and double-tap again.

        Still need help?

         Email us at Support@vitiry.com. And we will resolve your issue as soon as possible.